- Описание товара
- Технические характеристики
- Статьи и видео
- Картинки и схемы
Matrox Concord is a family of Gigabit Ethernet network interface cards (NICs) and IEEE 1394b adaptors that are pre-licensed for use with the Matrox Imaging Library (MIL) drivers for the GigE Vision® and IEEE 1394 IIDC protocols.
Key Features
- PCIe® x1 or conventional 32-bit PCI low-profile card
- lifecycle managed and long term availability
- GigE Vision® or IIDC support through Matrox Imaging Library (MIL)
- pre-licensed for use with MIL GigE Vision® or IIDC drivers
- pre-configured for optimal GigE Vision® performance (G-series)
- fingerprint for, and storage of, supplemental MIL run-time license(s)1
- programmed using Matrox Imaging Library (MIL) sold separately
- supports 32/64-bit Microsoft® Windows® XP/Vista®/7 and Linux®2 through MIL
Matrox Concord GE/GX - Hardware
- PCIe® x1 (GE) or 32-bit, 66 MHz conventional PCI (GX) universal (3.3V/5V) host bus interface
- Intel® Gigabit Ethernet PHY/MAC/Link controller
- single port
- handles 10/100/1000 Mbps connections
- supports Jumbo frames/packets up to 9014 bytes
- selectable interrupt moderation rate
- resizeable receive buffers/descriptors
- supports auto MDIX (signal crossover)
- standard RJ45 connector
Power consumption and Dimensions
- GE: 3.3V @ 0.44 A (1.45 W) typical
- GX: 5V @ 0.4 A (2 W) typical
- PCI low-profile4, sub-half-length
- GE: 7.4 cm L x 6.9 cm H x 1.6 cm W (2.9” x 2.7” x 0.62”) from bottom edge of goldfinger to top edge of board and without bracket
- GX: 11.9 cm L x 6.4 cm H x 1.6 cm W (4.7” x 2.5” x 0.62”) from bottom edge of goldfinger to top edge of board and without bracket
Matrox Concord FE/FX - Hardware
- PCIe® x1 (FE) or 32-bit, 33 MHz conventional PCI (FX) universal (3.3V/5V) host bus interface
- Texas Instruments physical/link layer controller
- OHCI compliant
- three (3) bilingual IEEE 1394a/b ports
- 9-pin connector for copper cabling
- provides power (up to 12 W per port)
Power consumption and Dimensions
- FE: 3.3V @ 0.33 A (1.1 W) typical
- FX: 5V @ 0.2 A (1 W) typical
- PCI low-profile4, half-length
- FE: 8.6 cm L x 6.9 cm H x 1.6 cm W (3.4” x 2.7” x 0.62”) from bottom edge of goldfinger to top edge of board and without bracket
- FX: 11.9 cm L x 6.4 cm H x 1.6 cm W (4.7” x 2.5” x 0.62”)
from bottom edge of goldfinger to top edge of board and without bracket
нет изображений